(8:30am - 4:30pm Mon - Fri)
(8:30am - 4:30pm Mon - Fri)
Quick answer: A replacement charger has to match three things on your battery: the brand platform, the voltage and the chemistry. A Ryobi 18V ONE+ charger will not charge a Ryobi 36V pack, and a lithium charger will not charge an old NiCd pack. Charge time is roughly the battery's amp hours divided by the charger's amps.
Read the label on the battery, not the tool. It shows the voltage, the chemistry and the model code.
| Battery label | Charger you need |
|---|---|
| Ryobi 18V ONE+, lithium or NiCd | ONE+ dual chemistry charger |
| Ryobi 36V (sold as 40V overseas) | 36V and 40V charger |
| Makita 18V lithium, BL18 series | 18V lithium charger, DC18RC style |
| Older Makita NiCd or NiMH, 7.2V to 18V | NiMH and NiCd charger |
| AEG 18V | AEG 18V charger |
| 12V LiFePO4 for camping or caravans | 14.6V LiFePO4 charger: 20A, 30A or 40A |
Chargers do not cross brands. A Makita battery will not charge on a Ryobi charger, and adapters that let one brand's battery run another brand's tool do not change that.
Divide the battery's amp hours by the charger's amps. A 5Ah battery on a 2A charger takes about two and a half hours. The same battery on a 6A rapid charger takes under an hour. The last part of the charge is slower, so allow a little extra.
Codes differ by brand, so check the legend printed on the charger. Two patterns are common.
Modern lithium chargers stop when the pack is full. Fire services still advise against leaving lithium batteries charging unattended or overnight. Take the pack off when the light goes green and store it somewhere cool.
No. Each brand uses its own contacts and its own battery communication. Use a charger made for that platform.
Not when it is built for that platform. Heat is what ages a pack, so let a hot battery cool before you charge it.
Yes. Each charger is built for the platform named in its listing and charges genuine and compatible packs on that platform.
Most often the pack is too hot, too cold or at the end of its life. Test with another battery before you replace the charger.
Important: Match the voltage, chemistry and model code on each listing before ordering. Compatible products are not manufactured or endorsed by Ryobi, Makita, AEG, Milwaukee or DeWalt.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment